AC/DC Power adaptator
14,76 € VAT included
Power adaptator to be used for LED and fan mod.
“12V power plug” is necessary to connect LED and/or fan (red and black wires, with screws, no soldering) to the power adaptator.
If you want to add LED and/or fan to your enclosure, you will need to power them with 12V.
Prusa does not recommand to use the printer's power supply unit, so you will need to add a separate one.
12V 3A is in most case enough, but if you plan to power a Raspberry, you will need 5A.
/!\ To power a Raspberry, you will also need to have a converter to get 5V
Input 100-240V AC, 1.2A
Output 12V, 3A
Input 100-240V AC, 1.5A
Output 12V, 5A
|12 × 6 × 6 cm