Prusa Box
A better home for your printer
$255,23 $245,39 VAT excluded
In stock
After buying your first 3d printer, you spent a lot of hours in setting up it to get the best result?
After long weeks without printing, when you start on you cross finder to wake up in a good mood?
Too noisy? too ugly?
Your companion is always asking to
get it away?
Get better printings
Reduce warping
Most of the time, when you start 3d printing, you can get warping failure. An enclosure, by controling ambient temperature, reduce warping situation.
Protect printer from dust
Protecting bearing, rods, belt, gear from dust increase printer lifetime.
Control ambient temperature
By controling ambiant temperature, you stabilize print parameters.
Printer-box users:
5 reviews for Prusa-box 3d enclosure for Prusa mk3s mk2.5s
Josef Průša created one of the best 3D printer in the world.
Our goal is to preserve it and to get the best result out of our 3D printer!
Prusa-box benefits
PSU cooling with dedicated air vent
With dedicated air vent in the enclosure, we supply outside air to the power supply.
Control panel and touch screen
Outside control panel allow to manage easily your printer.
Our design is ready for Raspberry PI with 3.5″ touch screen and raspeberry. Ready to print STL files in download sections.
Filament spool position
PrusaBox offers configuration for inside spool or outside spool:
- Inside spool: Parts available in download
- Outside spool: every spool holder on the market can be used.
Easy load filament
As always when you launch a print the wrong spool is loaded on the printer, we change spool filament very often.
Top door helps a lot to get easy filament loading.
Ready to print
Ready to print STL plate
All printable file are easy to print.
Available in download section
We’re working to do very efficient ready-to-print STL files and documentations.
Our goal is to reach the Prusa documentation level!
Easy to assemble
Online assembly guide
Online documentation with 7 steps.
Discover the documentation
Safety
Remove VOCs and ultrafine particule
3d printing creates plastic fumes (VOCs) and ultrafine particules. With HEPA filter and Carbon filter, we can remove 99.97% of particles.
Protect pets and children
With moving parts and hot parts, 3d printes can be dangerous for pets and children. With an enclosure you’ll spare your nerves, and keep that cat away once and for all!
Easy to customize
A lot of modification and accessories available
A lot of accessories are already available for you to print, and more to come :
- webcams mount
- Raspberry case
- Screen support
- Thermometer bracket
- Filters
Choose your color
Classic dark/grey color or funky color, what will fit to your living room/office ?
Easy to modify
3d printed files are available in STEP format to enable easy modification.
Prusa Box is under developpment.
Launching in the next weeks
Easy to customize
Great community
Facebook page
Follow us on Facebook to keep update!
Facebook group
Join our community !
We are above all 3d printer users. We design our product with care, it’s our baby!
High quality
Made in France
Everything is designed and made to high industry standards in a small factory in France.
No compromise on quality
We use top quality equipment: Laser cutting machine, CNC benfing.
With top quality material: brushed stainless steel and PMMA
Specifications:
Dimensions :
Prusa-Box is designed for Prusa mk3s, mk2s. Therefore, it can also fit a Prusa mini and other printers with similar or smaler dimensions.
- Inside : width: 450mm x depth: 548mm x height: 448mm
- Outside : width: 452mm x depth: 550mm x height: 450mm
Our kit includes :
- All Stainless steel part (7pcs) : bottom + top + 4 corners + 3 crossbeams
- All doors in PMMA transparent (5pcs) : front + back + left + right + top
- Required screws, nuts and pins for assembly
- You have unlimited access to STL files and assembly guide
Kit does NOT include printed parts. You have to print parts yourself.
Shipping information:
| Orders date | Shipping date |
| December 2020 | February 15-20th, 2021 |
| January 2020 to March, 10th 2021 | March 15-20th, 2021 |
| March, 11th 2021 and after | April 5-10th, 2021 |
Get your kit now !
Prusa-box 3d enclosure for Prusa mk3s mk2.5s
$255,23 $245,39 VAT excluded
In stock
Feel free to ask us your
questions and remarks
Our story
A few months after buying my first 3D printer in 2012, I started to look for some sort of enclosure.
The obvious first one was the famous Prusa Lack which is a great and affordable option (around 2×7€ + 50€ for plexiglass)
Since I wanted to put my printer in my living room (and I felt it should look cool too) I started to look for a more appealing design.
There are a few options on the market, but none would fit my expectations.
Plus, most of them where too expensive and rarely consumer-oriented.
That’s why I decided to build my own.
With my experience as an engineer and working as a professional in the metal industries I drafted many ideas for an efficient and nice looking enclosure. As well as affordable.
Now I’m happy to show you Prusa Box. The main idea with Prusa Box is to accommodate both flexibility of 3d printing with quality and robustness of stainless steel.
Julien
We make it easy !
Step 1 : Get your kit
Step 2 : Print your part
Step 3 : Assemble it !
Customer review
5 reviews for Prusa-box 3d enclosure for Prusa mk3s mk2.5s
-
A lot of thought has gone into this box. Well designed with easy access to the printer.
-
The enclosure is great. If you have ideas you can communicate them to the developer and then respond to them. I am very happy to finally have a suitable and customizable housing.
-
I am very pleased with the enclosure it was relatively easy to put together and reduces the sound of the printer.
Because of its compact size i can fit it on my desk with my computer. -
Super happy about my enclosure. For a version 1 product the fit and finish is really incredible. I love that STEPs are included for customization.
-
A great enclosure allowing customization for your Prusa printer!!!
Un caisson idéal pour votre imprimante Prusa et offrant de grandes possibilités de personnalisation !!!
Brett Ellis –
A lot of thought has gone into this box. Well designed with easy access to the printer.
Christian Refle –
The enclosure is great. If you have ideas you can communicate them to the developer and then respond to them. I am very happy to finally have a suitable and customizable housing.
Paul Kingwell –
I am very pleased with the enclosure it was relatively easy to put together and reduces the sound of the printer.
Because of its compact size i can fit it on my desk with my computer.
D. Otto –
Super happy about my enclosure. For a version 1 product the fit and finish is really incredible. I love that STEPs are included for customization.
Fred BOURHIS –
A great enclosure allowing customization for your Prusa printer!!!
Un caisson idéal pour votre imprimante Prusa et offrant de grandes possibilités de personnalisation !!!