Si vous souhaitez ajouter des LED et/ou un ventilateur à votre caisson, vous devrez les alimenter en 12V.
Prusa ne recommande pas d'utiliser le bloc d'alimentation de l'imprimante, vous devrez donc en ajouter un autre.

12V 3A est dans la plupart des cas suffisant, mais si vous prévoyez d'alimenter un Raspberry, vous aurez besoin de 5A.
/Pour alimenter un Raspberry, il faut aussi un convertisseur pour obtenir 5V.

Spécifications 3A :

Entrée 100-240V AC, 1.2A

Sortie 12V, 3A

Spécifications 5A :

Entrée 100-240V AC, 1,5A

Sortie 12V, 5A

Wiring harness is made of high quality components and high quality silicone 18AWG wire.

LED:

Light can be control with a ON/OFF switch in the front of the enclosure. LED can be easily connected to the cable with a dedicated plug.
LED strip is not included and is available as a separated product here. Please select LED with connector to get the connector crimped on the LED cable.

Temperature control:

Temperature inside the enclosure is controlled by the W1219 circuit using fan filter. Fan can be easily connected to the cable with a dedicated plug.
For efficient temperature control please select the fan on our shop or another fan with high static pressure).
Fan is not included and is available as a separated product here. Please select fan with connector to get the connector crimped on the LED cable.

Power adaptator:

Power adaptator input: AC 100-240V 1.2A
Power adaptator output: DC12V 3A or 5A depending on the option chosen
This power adaptator is dedicated for LED + FAN.
/! If you want to add a Raspberry you need a 12V 5A power adaptator, and a 12V to 5V power converter.

Installation:

This kit is designed for:

• Prusabox with Black or silver printer PSU.
• Prusabox with classic control panel
• Prusabox with Modular control panel
• Prusabox with temperature control panel on the right side.

Cable extensions necessary with:

• Modular box size L, with the Modular control panel: the temperature control panel will go on the right side of your box, and you need to extend connections for LED and fan of 20 cm each.
• Modular box XL: because this version is bigger, you need to extend connections for LED and fan of 20 cm each.
• Modular box XL and the Modular control panel: As the two previous lines explain, you need to extend of 40 cm each

This product is not compatible with cooling system, which is a simplified way to decrease enclosure's inside temperature.