Our designs Archives - Printer Box https://www.printer-box.com/category/our-designs/ The best home for your printer Tue, 29 Mar 2022 16:03:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://www.printer-box.com/wp-content/uploads/2022/09/cropped-icone-prusa-teaser-32x32.jpg Our designs Archives - Printer Box https://www.printer-box.com/category/our-designs/ 32 32 HEPA & Carbon Filter https://www.printer-box.com/hepa-carbon-filter/ https://www.printer-box.com/hepa-carbon-filter/#comments Thu, 24 Sep 2020 12:33:33 +0000 https://www.printer-box.com/?p=104 The post HEPA & Carbon Filter appeared first on Printer Box.

]]>

Remove VOC (Volatile Organic Compounds) from your house!

1. Components :

  • Fan 120 x 120mm, Thickness 25mm:
  • Filter Zortrax Hepa Cover Filter Set are available on shop.

2. Print:

Files are inside the ZIP file.

For this option, print file: quantity 1:

#1 : option04_HEPA_filter.STL

Download

3. Assembly:

1. Air flow schematics:

Air comes inside the enclosure through the air entry on the bottom left of the enclosure.

The fan is extracting hot air (with VOC compounds) out of the enclosure through the HEPA and carbon filter.

An optional air entry can be installed in order to cool the mainboard.

2. Filter assembly:

4x M3x12 screws + 4x M3 square nuts : to fix the filter to your enclosure
2x M3x10 screws + 2 x M3 square nuts: to close the filter

The filter can be installed in the top frame part of the Prusabox enclosure.

 

Most fans have an arrow on the side that indicate the air flow direction.

/!\ Install the fan with the arrow in the direction of the HEPA and carbon filter.

 Finished!

The post HEPA & Carbon Filter appeared first on Printer Box.

]]> https://www.printer-box.com/hepa-carbon-filter/feed/ 15 Hex key to screwdriver transformer https://www.printer-box.com/hex-key-to-screwdriver-transformer/ https://www.printer-box.com/hex-key-to-screwdriver-transformer/#comments Wed, 23 Sep 2020 11:22:40 +0000 https://printer-box.com/?p=51 The post Hex key to screwdriver transformer appeared first on Printer Box.

]]>

Transform your hex key from Prusa kit to hex screwdriver !

It becomes easy to handle and it limits over-tightening risks.
No additional part required

Available:

  • M3 screw (2.5mm size hexagon)
  • M4 screw (3mm size hexagon)

Feel free to suggest any modification.

Print settings:

No support
20% infill
Printed with PLA

The post Hex key to screwdriver transformer appeared first on Printer Box.

]]> https://www.printer-box.com/hex-key-to-screwdriver-transformer/feed/ 2