PrusaBox configurator

Box corners and feet, Hinges, Horizontal and vertical cable management (B), Logo plate. (Print time 53h)
Printed parts are also available in Download section.

Does not include necessary printed parts for: printer's feet, Printer's PSU, control panel, side air entry

It is necessary to adapt printer’s feet to the box.
Printed parts are also available in download section.
(B)

To set your printer inside the PrusaBox, you will have to place printer's power supply unit at the back of your enclosure. Choose if you want to get printed parts to secure it.
Printed parts are also available in Download section.
Depends on your PSU, check pictures.
Most MK2 have SIlver PSU, most MK3 and all MK4 have Black PSU
(B)

Wiring harness is necessary for temperature control

Choose the temperature control option if you need to place the temperature control on the enclosure's side

Need to be used with wiring harness

To prevent the enclosure's inside temperature to rise too much, we advise to use one on these fan system.
/! Max filtration system requires wiring harness to work but is automatically powered when the inside temperature exceeds pre-set temperature.

Additional power supply is necessary to power your LED and/or fan. Choose 5A if you want to power a Raspberry.