+33 3 70 88 55 65 firstname.lastname@example.org
Euro United States (US) dollar
This page allows to configure step by step your ModularBox, to get at the end every options you want!
To have more information about each article, follow this link
Our enclosures are manufactured in France in a top level factory.
Feel free to contact us if you have any questions.
Includes all metal frame parts, translucent doors, and necessary silver hardware.
Box corners and feet, Hinges, Horizontal and vertical cable management (B), Logo plate. (Print time 53h) Printed parts are also available in Download section.
It is necessary to adapt printer’s feet to the box. Printed parts are also available in download section. (B)
To set your printer inside the ModularBox, you will have to place printer's power supply unit at the back of your enclosure. Choose if you want to get printed parts to secure it. Printed parts are also available in Download section. Depends on your PSU, check pictures (B)
Choose which component you want to place on the front top slot.
Wiring harness is necessary for temperature control
Choose the temperature control option if you need to place the temperature control on the enclosure's side
Need to be used with wiring harness
To prevent the enclosure's inside temperature to rise too much, we advise to use one on these fan system. /! Max filtration system requires wiring harness to work but is automatically powered when the inside temperature exceeds pre-set temperature.
Additional power supply is necessary to power your LED and/or fan. Choose 5A if you want to power a Raspberry.
Cable extensions necessary with:
Modular box size L, with the Modular control panel: the temperature control panel will go on the right side of your box, and you need to extend connections for LED and fan of 20 cm each. Modular box XL: because this version is bigger, you need to extend connections for LED and fan of 20 cm each. Modular box XL and the Modular control panel: As the two previous lines explain, you need to extend of 40 cm each.
Choose a color if you order printed parts. Parts with (B) are always printed in black.
Unless you choose this option, this product comes fully in kit: assembly guide is available in Help section.
Enter your details below to save your shopping cart for later. If you are ready to get your box now, we have a special gift for you, coupon code: BEST-BOX for 10€ off!