Max filtration system

49,98  VAT included

We found the best for your enclosure and your health!

Specially made for 3D printing, P3D media filter from Alveo3D protect you from 99.95% of particles as small as viruses with EN-1822 certified HEPA H13 category filter media. Activated carbon reduces very significantly odors emitted during printing and treats a broad spectrum of VOCs.

Want to know more ? Go to Max filter product page

Sunon fan is specially chosen to be powerfull enough for this filter.

Includes:

  • 1x Sunon 120x120x25 fan
  • 1x crimped connector for wiring harness
  • 1x Protection grid
  • 1x Seal
  • 4x M4*35 screws

Optional:

  • 2x printed parts
  • 1x filter

 

Delivered as a kit, assembly guide available here

Out of stock

SKU: max-filter Categories: ,

Fan can not be plugged on the printer (Printers manufacturers, like Prusa3d  or Caribou3d, do not recommend to plug any additional equipment on the printer PSU or electronic board). So fan or leds need dedicated power adapter.
Power adapter with wiring kit is available on our shop: prusabox-wiring-harness-led-temp-control/
Or do it yourself instruction is available on Knowledge base: electrical-components-wiring

Not compatible with "SImple HEPA&Carbon filter"

Fan's specifications Sunon EEC0251B1:

  • Dimensions : 120x120x25mm
  • Static pressure: 0.28inch H2O / 7.11mm H2O
  • Air flow (without filter): 183.83m3/h
  • Noise: 44.5dBA
  • Voltage: 12v
  • Compatible with Prusabox and Modular-box

Additional information

Weight0,4 kg
Dimensions12 × 12 × 2,5 cm

Reviews

There are no reviews yet.

Show only reviews in English (0)

Be the first to review “Max filtration system”

Your email address will not be published. Required fields are marked *

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later.
If you are ready to get your box now, we have a special gift for you, coupon code: BEST-BOX for 10€ off!