2 in 1 filter!

Max HEPA&Carbon filter

Specially made for 3D printing, P3D media filter from Alveo3D protect you from 99.95% of particles as small as viruses with EN-1822 certified HEPA H13 category filter media. Activated carbon reduces very significantly odors emitted during printing and treats a broad spectrum of VOCs.

Includes:

1x filter

Has to be used with EEC0251B1 Sunon fan, available here

19,98 € VAT included

16,65 € VAT excluded

In stock

Secure Payments By

Filter composition

1.

2.

3.

4.

5.

6.

Nylon grid

Nylon HEPA media protection grid to prevent deterioration of filtration performance.

HEPA 13

Pleated HEPA media in cotton impregnated with grade 13 certified EN1822, provides protection against emitted nanoparticles.

Carboard frame

Cardboard structure to reduce plastic waste, helps reduce the weight of the filter and its specific design.

Activated carbon

Activated Carbon mixture for the treatment of VOCs specific to 3D printing.

Removal tab

The tabs allow the filter to be removed from its location without taking the risk of touching polluted surfaces.

EPDM foam

Peripheral and frontal 5mm EPDM foam for a maximum sealing of the joint surface.

Long life time

It is recommended to replace your filter every 600h of printing !

Works with ABS, PLA, PET/PETG, HIPS,Nylon etc…

Specifically designed for 3D printing

Nanoparticle filtration is provided by a HEPA13 (High Efficiency Particulate Air) filter to EN1822 standard. These filters are designed to guarantee a rate of 99.95% purification efficiency on particles at the most penetrating size (approximately 300nm).

To ensure full efficiency, Alveo3D test P3D filters below 300nm and guarantee high efficiency on nanoparticles from 7 to 200nm.

Compatible with ModularBox and PrusaBox

This filter is compatible with MAX filtration system. Can be mounted on both PrusaBox and ModularBox!

Go to Max filtration system page

Specifications

124 x 124 x 44 mm
0.160 kg
Lifetime 600h

Get the best enclosure now!

Ready for dispatch January 2023