E3D V6 Hotend

Description

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 300°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C), then you will need to use a plated copper heater block along with a PT100 or PT1000. Print standard materials such as PLA, PETG and ABS and high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.

Precise

Our all-metal HeatBreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal HeatBreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Key features:

– All metal heatbreak

– Maximum temperature: 300ºC

– Cartridge style heater block

– Groove mount

– 12V or 24V

Default Kit includes:

– 1 x V6 heatsink 1.75mm

– 1 x V6 heatbreak 1.75mm

– 1 x V6 brass 0.4mm nozzle 1.75mm

– 1 x V6 duct

– 1 x V6 aluminium heater block

– 1 x Heater cartridge 12V or 24V

– 1 x Thermistor cartridge

– 1 x Thermistor extension cable

– 1 x 30 x 30 x 10 fan 12V or 24V

– 1 x Thermal compound

– 1 x V6 fixings kit

– 1 x V6 silicone sock

– 1 x PTFE tubing 100mm