Wenn Sie Ihr Gehäuse mit LEDs und/oder Lüftern ausstatten möchten, müssen Sie diese mit 12 V versorgen.
Prusa empfiehlt nicht, das Netzteil des Druckers zu verwenden, Sie müssen also ein separates Netzteil hinzufügen.

12V 3A ist in den meisten Fällen ausreichend, aber wenn Sie einen Raspberry mit Strom versorgen wollen, benötigen Sie 5A.
/! Um einen Raspberry mit Strom zu versorgen, benötigen Sie auch einen Konverter, um 5V zu erhalten

Spezifikationen 3A:

Eingang 100-240V AC, 1,2A

Ausgang 12V, 3A

Spezifikationen 5A:

Eingang 100-240V AC, 1,5A

Ausgang 12V, 5A

Wiring harness is made of high quality components and high quality silicone 18AWG wire.

LED:

Light can be control with a ON/OFF switch in the front of the enclosure. LED can be easily connected to the cable with a dedicated plug.
LED strip is not included and is available as a separated product here. Please select LED with connector to get the connector crimped on the LED cable.

Temperature control:

Temperature inside the enclosure is controlled by the W1219 circuit using fan filter. Fan can be easily connected to the cable with a dedicated plug.
For efficient temperature control please select the fan on our shop or another fan with high static pressure).
Fan is not included and is available as a separated product here. Please select fan with connector to get the connector crimped on the LED cable.

Power adaptator:

Power adaptator input: AC 100-240V 1.2A
Power adaptator output: DC12V 3A or 5A depending on the option chosen
This power adaptator is dedicated for LED + FAN.
/! If you want to add a Raspberry you need a 12V 5A power adaptator, and a 12V to 5V power converter.

Installation:

This kit is designed for:

• Prusabox with Black or silver printer PSU.
• Prusabox with classic control panel
• Prusabox with Modular control panel
• Prusabox with temperature control panel on the right side.

Cable extensions necessary with:

• Modular box size L, with the Modular control panel: the temperature control panel will go on the right side of your box, and you need to extend connections for LED and fan of 20 cm each.
• Modular box XL: because this version is bigger, you need to extend connections for LED and fan of 20 cm each.
• Modular box XL and the Modular control panel: As the two previous lines explain, you need to extend of 40 cm each

This product is not compatible with cooling system, which is a simplified way to decrease enclosure's inside temperature.