Latest news :

LCD & Raspberry case news design

LCD & Raspberry case news design

In order to get correct position of Raspberry power cable, I redesigned the case. Thanks to your feedback, LCD back is now completely closed and Raspberry PI is also closed. Raspberry PI can be cooled with and optional 30mm fan with outside air.  LCD back is...

Prusa holes & nut slot dimensions

Prusa holes & nut slot dimensions

Always when I am designing 3d printed parts, I wonder what will be dimensions on the real part. Especially on holes for screw and nut slot. I made a small analyse on the Prusa Mk3s STL files : We can see that then is a range of size for the same purpose : M3 nut hole:...

Rapsberry PI with Octoprint power supply

Rapsberry PI with Octoprint power supply

1) Components: For my first DIY enclosure I used a big power supply similar to 3d printers power supply. For this project I decided to use an 12V 5A AC adapter from Amazon for 12$: Amazon.com Amazon.fr In order to plug the Raspberry, we need to supply 5V and I choose...

Camera bracket

Camera bracket

For adding the camera bracket we design an easy printed rail. This rail is mounted using the same screw as front hinge door. For easy adjustement regarding require timelapse configuration, Camera can be install on the full height. Rail can be used for adding other...

MMU2S configuration for Prusa Box

MMU2S configuration for Prusa Box

Prusa Box MMU2S configuration will be available. We are trying to get: no modification on MMU2S unit no modification on Prusa Box stainless steel part as low as possible air leakage.  Our idea is to do a sliding flap linked to MMU selector.  We have to check: Cable...

Spool holder inside or outside

Spool holder inside or outside

When we are designing an enclosure we think that spool can be inside or outside the enclosure. Thanks to community feedback, we can see that both position has advantage : Filament spool outside: Outside in its own air sealed or anti humidity box Easier spool change...

Unicorn feet!

Unicorn feet!

All printed part is available in download section, therefore you can easily customize them.

Air entry filter

Air entry filter

Today, we share our air entry filter ! As explained by 3d printing nerd in this video, it is very important to let some fresh entring in the enclosure. Too much warmth is bad, let some heat out. Electronic are delicate, you must protect them. Power supplies and heat,...

Let’s Get Started

Enjoy our projet? Let’s Build this Thing Together!

.
Share This